103BusinessPhone – Dialog 4224 Operator / Dialog 3214
Settings
Extend mode
You can select between three different extend modes:
1. Extend manually with hook (default value).
2. Extend manually with extend key.
3. Extend automatically. (The call is extended automatically
without pressing a key.)
extend Press (see display).
forward Press to select extend mode (see display).
enter Press to confirm the settings (see display).
Clear
è Press to finish the procedure.
Signalling mode
You can select between two different signalling modes:
1. Continuously (default value).
2. Burst.
signalling Press (see display).
forward Press to select signalling mode (see display).
enter Press to confirm the settings (see display).
Clear è Press to finish the procedure.
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
EXTEND MANUALLY WITH HOOK
backward forward enter return
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
SIGNALLING MODUS: CONTINUOUSLY
backward forward enter return
Dialog4224En.book Page 103 Tuesday, August 24, 2004 5:40 PM
To Next Page
Loading...
