Ericsson Dialog 4225 Vision - Page 105

105Dialog 4223 Professional/Dialog 4225 Vision
Settings
Dialog 4225 Vision:
Å Select PhoneSet in the top menu (see display).
Down or Up Press to frame Set Hearing Level (see display).
Select Press (see display).
A tone signal is heard, and the display shows the current setting.
The Line 1 key lamp also indicates the current setting;
key lamp off=standard level, key lamp on=increased level.
Change Press to change the volume level (see display).
The display shows the new setting. The Line 1 key lamp also
indicates the new setting as described above.
Exit Press to finish setting (see display).
When extra amplification has been selected, the Line 1 key lamp
turns off.