Ericsson Dialog 4225 Vision - Page 62

Call Forwarding
Dialog 4223 Professional/Dialog 4225 Vision62
Diversion when there is no answer
Order:
Absence Press (see display).
If
Absence is not shown, press more... until appearing.
Down or Up Press to frame Div on no answer to nnnn: Not active
(see display).
(nnnn = number to the answering position, e.g. the operator).
Activate Press (see display).
Exit Press (see display).
The incoming call is diverted after 3 signals.
Note: You can also use the following procedure to activate:
dial
* 2 1 # and press the Clear key.
Cancel:
Absence Press (see display).
If
Absence is not shown, press more... until appearing.
Down or Up Press to frame Div on no answer to nnnn: Active
(see display).
(nnnn = number to the answering position, e.g. the operator).
Deactivate Press (see display).
Exit Press (see display).
Note: You can also use the following procedure to cancel:
dial
# 2 1 # and press the Clear key.