Call Forwarding
Dialog 4223 Professional/Dialog 4225 Vision68
To activate or change to another profile from your office
phone
Absence Press (see display).
If
Absence is not shown, press more... until appearing.
Down or Up Press to frame Select Profile (see display).
Select Press (see display).
Down or Up Press to frame the required profile (see display).
Select Press (see display).
The display shows the selected profile.
Notes:
You can also use the following procedure to activate:
dial
* 1 0 *, enter the search profile digit (1-5), press # and
press the Clear key.
You can also activate/cancel and change to another profile
by programming one Function key/search profile (the
Function keys has to be pre-assigned by your system
administrator). When the search profile is active the key
lamp is on. See section “Settings” on page 96.
When another party is included in the activated profile, a
colleague or an operator, etc., always remember to inform
about your absence. If Voice Mail is included in the
activated profile, always update your greeting with Absence
Information.
To cancel from your office phone
Absence Press (see display).
If
Absence is not shown, press more... until appearing.
Down or Up Press to frame Select Profile (see display).
Select Press (see display).
Down or Up Press to frame No Profile (see display).
Select Press (see display).
Note: You can also use the following procedure to cancel:
dial
# 1 0 # and press the Clear key.
To Next Page
Loading...
