CALL FORWARDING
24
BusinessPhone 250 - Portable DT288
BusinessPhone 50 - Portable DT288
INDIVIDUAL
DIVERSION
(continued)
Program and activate
a new external
diversion address To set a new individual external diversion address:
Dial
Dial the digit(s) for external call access and enter
the new external diversion address
A maximum of 24 digits.
Press to activate the individual diversion
Verification tone.
Note: Individual external diversion can also be used via the
DISA function, see section “Other useful facilities”.
Cancel external
diversion
Dial
Note: The programmed diversion address is not removed from
the memory, the diversion is just inactive.
Re-activate external
diversion Divert your calls to an external position.
Dial to activate the programmed external diversion
You can make outgoing calls as usual. A special dial tone
reminds you that ”Call forwarding” is active. The display
shows that you have activated an external diversion.
To Next Page
Loading...
