INTERNAL MESSAGES
31
BusinessPhone 250 - Portable DT288
BusinessPhone 50 - Portable DT288
CHECK AND STORE
RECEIVED
MESSAGES A received message is indicated with a message icon
(envelope) in the display (a special dial tone can also be used
to indicate a waiting message, if programmed). In addition
you can see the number of queued messages in the display.
Received messages are divided into following three categories:
• New messages (not heard or read)
• Heard/Read messages
• Stored messages
Note: Messages are deleted from the system after a certain time.
The time depends on which category the message belongs to.
Please ask your system administrator regarding this.
Dial
You can check and store your received messages. Up to 20
messages can be stored.
Voice messages will be heard. ”Call me” messages will call the
sender automatically (these messages cannot be stored).
Note: Depending on the configuration, you might be asked for
your password before you can retrieve your messages.
See section ”Security”.
To Next Page
Loading...
