31/70
Warning!: Pos has to have two digits always. For example,
memory position number 1 has Pos=01
To manage the
phonebook in …
With
Function …
Dial … You will hear…
Store **51*Pos*Phone_number# 1 beep
Delete #51*Pos# 3 beeps
Check position *#51*Pos*Phone_number#
1 beep if memorized
3 beeps if not
memorized
SIM card memory
Dial Pos# Dialing …
Store **51*Pos*Phone_number*1# 1 beep
Delete #51*Pos*1# 3 beeps
Check position *#51*Pos*Phone_number*1#
1 beep if memorized
3 beeps if not
memorized
FCT memory
Dial Pos* Dialing …
Note: if instead of hearing beeps you hear a loud and low tone,
this means that there has been an error in the activation or
deactivation
11.6 VOICE MAIL
The answering service of your network allows callers to leave
a voice message when you cannot answer your calls.
If you have voice mail, you will hear 3 beeps before the dial
tone, as soon as you pick up the receiver to make a call.
Note: if you have the DA20 display adapter accessory (See
“FCT accessories” on page 41), a
icon will show when
you have voice mail.
Call your voice mail number in order to receive the voice mail
message.
11.7 SENDING TONE SIGNALS
To Next Page
Loading...