Mechanical Working Instruction
3/000 21-1/FEA 209 544/21 D 6(20)
3 Replacement, Mechanical Parts
3.1 Volume button
3.1.1 Instructions
• No Disassembly or Reassembly.
# Figure Instruction Note
1 Remove the volume button by
pressing in your nail between
the button and the front and
pull carefully outwards
2 Be careful, not to damage the
front and control that no
snapholders comes loose and
stays inside the phone.
3 Mount the new volume button
place the two upper snap-
holders first and then push in
the other side
4 The triangle arrow inside the
button will point upward
5 Push the volume button up and
down to secure it snapped onto
the volume switch
To Next Page
Loading...
