Ericsson R320S - Page 103

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
Using the WAP™ Browser 103
8. Enter the IP address to your gateway and press YES.
An IP address looks something like this: 123.4.67.901.
Note! An IP address consists of four groups of digits, with a maximum of three
in each group. If one of your digit groups consists of only one or two digits,
you have to enter a zero (0) in front of the original digit for each digit that is
missing. Example: If you were to enter the IP number above, 123.4.67.901,
you would need to write 123.004.067.901.
9. After you have entered the IP address, press
NO in order to jump up one
level in the menu system. You should now stand directly under the WAP
profile you are editing.
10. Scroll to
GSM Data and press YES.
11. Scroll to
Phone Number and press YES.
12. Enter the phone number you should use with your GSM Data connection
and press
YES.
13. Scroll to
User ID and press YES.
14. Enter the user ID to your GSM Data connection and press
YES.
15. Scroll to
Password and press YES.
16. Enter the password to your GSM Data connection and press
YES.
17. Scroll to
Dialtype and press YES.
18. Select whether you want to use
Analogue or ISDN connection.
19. Scroll to
InactiveTimeout and enter how many seconds the browser should
remain idle while connected before it asks you to remain either connected
or if it should disconnect. Press
YES.
SettingupanSMSConnection
1. Scroll to
WAP Services , YES, WAP Settings , YES.
2. Scroll to the WAP profile for which you want to use an SMS Connection
and press
YES.
3. Scroll to
Gateway , YES, User ID , YES
4. Enter the user ID to your gateway and press YES.
5. Scroll to
Password and press YES.
6. Enter the password to your gateway and press
YES.
7. Scroll to
SMS address and press YES.
8. Enter the phone number to your gateway and press
YES.
9. After you have entered the SMS address phone number, press
NO in order
to jump up one level in the menu system. You should now stand directly
under the WAP profile you are editing.
10. Scroll to
SMS and press YES.
11. Select
Service Centre and enter the phone number to your SMS Service
Centre.