N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
Display Information and Key Functions 13
Display Information and
Key Functions
In standby mode, the display shows the name of your operator, the time, the
signal strength and the battery power.
Other icons appear if you receive any messages, divert all your incoming
calls, set the alarm clock and so on. In this chapter, you will also learn about
the key functions.
The table below shows and explains each icon which may appear in standby.
Display Information
Icon Name Explanation
Signal strength
meter
Tells you the strength of the network
signal.
Battery meter Tells you the status of the battery.
Missed call
indicator
Youhavemissedanincomingcall.
Divert indicator
Accept Some/None
indicator
All incoming calls will be diverted to a
defined number.
No calls or only certain calls from
numbers in a list are received.
Ring signal off
indicator
No sound can be heard when you
receive a call.
Alarm indicator The alarm clock has been set and is
on.
Silent indicator All audible signals are turned off,
exceptthealarmandtimer.
SMS indicator You have received a text message.
Voice mail indicator You have received a voice message,
depending on your subscription.
Line 1 indicator Line 1 is in use for outgoing calls - if
you subscribe to the Two Line Service
Line 2 indicator Line 2 is in use - if you subscribe to the
Two Line Service.
Infrared modem The built-in infrared modem is
activated.
To Next Page
Loading...
