Ericsson R320S - Page 77

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
Security for Your Phone and Subscription 77
Changing the phone lock code
1. Scroll to
Settings , YES, Locks , YES, Phone Lock , YES, Change Code , YES.
2. Follow the steps described in “To change your PIN code” on page 75.
Note! It is important that you remember your new code. If you should forget it,
you have to hand in your phone to your local Ericsson retailer.
To set the phone lock to on, automatic or off
1. Scroll to
Settings , YES, Locks , YES, Phone Lock , YES, Protection , YES.
2. Select
On , Automatic or Off . The current selected setting is not available in
the list.
3. Enter the phone lock code and press
YES.
The new lock statusis shown.
The keypad lock feature helps you to avoid accidental dialling, which can
happen if you keep your phone in your pocket. You can choose between
manual and automatic keylock.
An icon in the shape of a key in the display informs you that the keypad is
locked.
Note! Calls to the international emergency number 112 can be made when the
keypad is locked. If the phone alarm rings, you can turn it off by pressing any
key.
The keypad remains locked until you:
• answer an incoming call,
• replace the battery,
• unlock the keypad.
The Manual Keylock
To lock the keypad manually
• Press C until the
Standby menu appears and then press *, or scroll to Keylock
on
and press YES.
To unlock the keypad
• Press C andthenpress*or
YES to answer the question Turn off Keylock? .
The Automatic Keylock
Automatic keylock means that if no keys are pressed in 25 seconds, the
keypad will be locked.
The Keypad Lock