Ericsson R320S - Page 84

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
84 Handling More than One Call Simultaneously
1. Put the current call on hold by pressing YES.
2. Enter the number you wish to call and press
YES.
You may also retrieve the number from your phone book by pressing and
holding
l.
Note! You can only put one call on hold.
If the Call Waiting service is on, you hear a tone in the earpiece if you receive
a second call. The number or name of the caller is normally shown at the top
of the display together with a list of the alternatives
Answer , Busy and
Release&Answer . If the incoming call is a restricted number, the display shows
Private .
You can do one of the following:
Put the current call on hold and answer the waiting call
• Press
YES to answer the waiting call.
The current call is now put on hold.
Your held call is marked in grey in the display and the active call is marked
in black.
Continue the current call and reject the waiting call
• Select
Busy .
The waiting call is rejected. If the caller’s network supports it, the caller
hears a busy tone.
Note! If ’Divert When Busy’ is on, the waiting call is diverted to the number
you have specified.
End the current call and answer the waiting call
• Select
Release&Answer .
When you have one active call and one call on hold, you can do one of the
following:
Switch between the two calls
• Press
YES.
End the active call and return to the call on hold
1. Press
NO.Thequestion Retrieve call? appears.
2. Press
YES.
If you press
NO, also the call on hold will be ended.
Making a Second Call
Receiving a Second Call
One Active Call and One Call On Hold
Call held