Ericsson R320S - Page 86

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
86 Handling More than One Call Simultaneously
To join the two calls into a conference call
• Scroll to
Ongoing Call , YES, Join Calls , YES.
You have now created a conference call (with yourself, the former active
and held calls as participants).
Adding New Participants to the Conference Group
You may put the conference group on hold and then add new participants.
To add a new participant
1. Press
YES to put the conference group on hold.
2. Call the next person you wish to include in the conference group.
3. Scroll to
Ongoing Call , YES, Join Calls , YES.
You can include up to five participants in the conference group by
repeatingsteps1to3above.
To check the participants in the conference group
1. Scroll to
Ongoing Call , YES, Parties in Conf , YES.
The first participant’s phone number is displayed, if available. If the
participant’s number and name are stored in your phone book, the name is
displayed instead. Otherwise the display shows part 1, 2 etc.
2. Scroll with
d to check the other participants.
Having a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the participants, you
may extract that participant from the conference and put the other participants
on hold.
To extract a participant
1. Scroll to
Ongoing Call , YES, Extract Part , YES.
2. Select the participant that you want to extract. Press
YES.
To rejoin the participant to the conference group
• Scroll to
Ongoing Call , YES, Join Calls , YES.
Releasing Participants from the Conference Group
You can release participants from the conference group one by one or all at
once.
To release a certain participant
1. Scroll to
Ongoing Call , YES, Release Part , YES.
2. Select the participant that you want to release. Press
YES.
To release all participants
• Scroll to
Ongoing Call , YES, Release All , YES.