Ericsson R320S - Page 92

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
92 Knowing the Call Time and Call Cost
Toresetthetotalcallcost
1. Scroll to
Call Info , YES, Call Costs , YES, Clear Total Cost , YES.
2. Press
YES to confirm your choice.
Note! If you subscribe to cost information, you must enter your PIN2 to clear
thecostortimecounter.
The Tariff function lets you enter and specify the price per call unit. The price
enteredisstoredonyourSIMcard.
Note! This service must be supported by your subscription and your network.
If you do not specify a price per call unit, the number of call units is displayed
during a call, and in ‘Last call’ and ‘Total cost’ in the ‘Call Info’ menu.
To enter the price per call unit
1. Scroll to
Call Info , YES Call Costs , YES, Set Tariff , YES.
2. Enter your PIN2 and press
YES.
3. Select
Change Tariff .
4. Enter the code for the currency you want, for example GBP for Pound
Sterling, and then press
YES.
5. Enter the price per call unit, for example 0.75, and press
YES. To enter the
decimal point, press #.
To revert to call units
1. Scroll to
Call Info , YES Call Costs , YES, Set Tariff , YES.
2. Enter your PIN2 and press
YES.
3. Select
Units .
If both your network and SIM card support this feature, you can enter a total
amount of money that can be used for making calls. This could be useful when
you lend your phone to someone and do not want their call costs to exceed a
certain amount which you can decide. After a call is made, the cost is
deducted from this amount. When the amount reaches zero, no more calls can
be made.
Note! As the price of a call may vary due to where you are calling from, at
what time of the day you are calling and so on, the credit limit is only an
estimated value.
Determining the Call Cost
Credit Limit for Calls