Ericsson T28 - Page 66

N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
66 Handling More than One Call Simultaneously
If the Call Waiting service is on, you hear a tone in the earpiece if you receive
a second call. The number or name of the caller is normally shown at the top
of the display together with a list of the alternatives Answer, Busy and
Release&answer. If the incoming call is a restricted number, the display
shows
Withheld . If the incoming call is a number without any CLI service,
Unknown is shown.
You can do one of the following:
Put the current call on hold and answer the waiting call
• Press
YES to answer the waiting call.
The current call is now put on hold.
Your held call is marked in gray in the display and the active call is marked
in black.
Continue the current call and reject the waiting call
• Select
Busy .
The waiting call is rejected. If the caller’s network supports it, the caller
hears a busy signal.
Note! If Divert When Busy is on, the waiting call is diverted to the number
you have specified.
End the current call and answer the waiting call
• Select
Release&answer .
When you have one active call and one call on hold, you can do one of the
following:
Switch between the two calls
• Press
YES.
End the active call and return to the call on hold
1. Press
NO.Thequestion Retrieve call? appears.
2. Press
YES.
If you press
NO, also the call on hold will be ended.
Endbothcalls
• Scroll to
Call Handling , YES, Release All , YES.
Receiving a Second Call
One Active Call and One Call On Hold