To Next PageTo Next Page
Need help?Do you have a question about the Erreka Fenix and is the answer not in the manual?
Detailed steps for mounting the actuator and related parts.
Steps to connect the operator to power and perform initial checks.
Overview of the parameter programming steps and options.
Procedure to set the door's open and close limits.
Instructions for programming remote controls (fixed and roller code).
Detailed guide to adjusting operational parameters like thrust, mode, and limits.
Verifying operation of controls, safety devices, and obstacle detection.
Table listing common problems, causes, and solutions.
General| Maximum thrust | 2800 N |
|---|---|
| Operating temperature | -20°C to +55°C |
| Motor Type | Electromechanical |
| Voltage | 230 V AC |
| Maximum Leaf Weight | 800 kg |
| Maximum Leaf Width | 5 m |
| Safety Features | Obstacle detection |
| Control Options | Remote control, push button |
