To Next PageTo Next Page
Need help?Do you have a question about the Erreka VULCAN and is the answer not in the manual?
Explains symbols used to highlight specific texts and warnings.
Emphasizes manual reading and outlines necessary installer skills and qualifications.
Defines device use and discusses automat safety elements for compliance.
Lists and illustrates all components required for a complete installation.
Describes the VULCAN actuator's construction, hydraulic pump, and drive piston.
Details absorption features in VUA/VU2A and the safety system in VUS models.
Identifies and illustrates the primary components of the actuator.
Provides technical specifications common to all models and specific to each variant.
Charts showing usage limits based on gate weight and length for different models.
Instructions on how to manually unlock and operate the actuator.
States compliance with relevant directives and safety standards for the actuator.
Lists the tools required for the installation process.
Checks for door suitability and environmental conditions before installation.
Instructions for positioning the actuator supports horizontally.
Emphasizes the importance of respecting dimensions for correct actuator function.
Provides charts for determining installation dimensions for short, inward opening actuators.
Provides charts for determining installation dimensions for short, outward opening actuators.
Provides charts for determining installation dimensions for long, inward opening actuators.
Provides charts for determining installation dimensions for long, outward opening actuators.
Instructions for assembling the swivel joint and fork components.
Steps for attaching the actuator to the front and rear supports.
Instructions for fitting the cover and tightening the cable gland.
Explains discharge screw operation and cable gland fitting.
Detailed steps for wiring the actuator motor to the control panel.
Guides on adjusting opening/closing pressures to meet safety standards.
Covers final checks, connections, and user handover procedures.
General guidelines for maintaining the actuator and checking for wear.
Identifies common problems, their causes, and recommended solutions.
Lists available spare parts with references for ordering.
Instructions for the proper disposal and recycling of the actuator.
General| Motor Voltage | 24 V DC |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Power Supply | 230V AC |
| Motor Type | DC |
| Safety Features | Obstacle detection |
| Control Options | Remote control, push button |
