English
Descripcion_10 v1.2.fm - 10/12/07
VULCAN hydraulic actuator 51
DESCRIPTION OF THE PRODUCT
1
ELEMENTS OF THE COMPLETE INSTALLATION
Fig. 1 Elements of the complete installation
n The safe and correct operation of the
installation is the responsibility of the installer.
)For greater safety, Erreka recommends installing the
photocells (4) and (10).
INSTALLATION COMPONENTS:
1Actuator
2 Flashing lamp
3 Door
4 Exterior photocells
5Key selector
6 Wall button
7 Control panel
8 Connections box
9 Electrical installation
10 Interior photocells
11 Electrolock
(obligatory in reversible models)
12 Closing stopper
13 Reception antenna
ELECTRICAL CABLING:
Element Nº threads x section Maximum length
A: General power supply 3x1.5mm
2
30m
B: Flashing lamp 2x0.5mm
2
20m
C: Photocells 2x0.5mm
2
30m
D: Key selector 2x0.5mm
2
50m
E: Actuator 4x0.75mm
2
(modelos VUS: 6x0.75mm
2
) 20m
F: Antenna Shielded cable 5m
To Next Page
