5
VULCAN / VULCAN S
Quick installation and programming guide English
IMPORTANT
NOTE
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The installation manual can be downloaded by going
to the "Downloads" section at the Erreka website:
http://www.erreka.com
TA
TC
TC
TA
TC
TA
TA
TA
TA
TC
Elements of the complete installation
Electrical cabling
A: Main power supply
B: Flashing light
C: Photocells
D: Pushbutton / key switch
E: Operator
F: Antenna
VULCAN
Unlocking
Unlocking for manual operation:
Turn the release key (1) in any direction
until it is perpendicular to the operator
spindle.
Motorised operation locking:
Turn the release key (1) in any direction
until it is parallel to the operator spindle.
VULCAN S
E140C
Locked Unlocked
VERY IMPORTANT: The
TC
closing stopper and the
TA
opening stoppers must be installed in all cases.
VERY IMPORTANT: using an
electrolock with closing position
microswitch is essential for VULCAN S.
MSH-020/05 – 2023-10-24
To Next Page
Need help?
General
