5. Rotate the fluorescent lamp around its axis to fit it correctly in the
fixture;
6. Turn on the unit.
ATTENTION: use only fluorescent lamps which conform to the
manufacturer's recommendations.
NOTE: In case of equipment, in which fluorescent lamps with double
shelter were used, these may be replaced for identical items only.
NOTE: In the course of fluorescent lamp replacement, a starting switch
(if applicable) shall be exchanged definitely.
In case of LED lighting, replacement shall be ordered with an authorised service point
indicated by the manufacturer.
8. Disposal
Upon the end of the design life, the device shall be disposed of as per local rules
and regulations. Prior to disposal of substances that are harmful to the
environment and are recyclable contact professionals for advice.
The manufacturer reserves the right to alter the design of the device!
To Previous Page
Loading...