6. ALWAYS turn off the power and disconnect the test leads before
opening the covers to replace the fuse or batteries.
7. NEVER operate the meter unless the back cover and the battery
and fuse covers are in place and fastened securely.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
NOTE: Ghost Voltage - On some low AC and DC voltage ranges, with
the test leads not connected to a device, the display may show a
random, changing reading. This is normal and is caused by the high-
input sensitivity. The reading will stabilize and give a proper
measurement when connected to a circuit.
SPARE PARTS LIST
#608 Replacement Test Leads CATIII 1000V
#637 Replacement Temperature Probe Bead Style
#671 Replacement Fuse 10A – 1000V
#672 Replacement Fuse 0.5A – 1000V
For other spare parts, please call 800-227-1603 or email your request
to info@esitest.com.
To Next Page
Loading...