ESAB A2 Multitrac - Installation; Installation Procedures and Components

3 INSTALLATION
0449 165 160
- 10 -
© ESAB AB 2020
3 INSTALLATION
3.1 General
The installation must be carried out by a professional.
WARNING!
Rotating parts can cause injury, take great care.
3.2 Main components A2TFJ1/A2TFJ1 Twin(SAW)
1. Carriage 6. Wire feed motor
2. Carrier 7. Wire guide
3. Wire feed unit 8. Flux hopper
4. Slide kit, manual 9. Flux tube
5. Contact tube 10. Guide pin