EasyManua.ls Logo

ESAB ESP-400C - Page 13

ESAB ESP-400C
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 1 SAFETY
ESP-400CPlasma Power Source
ESP-400CPlasma Power SourceESP-400CPlasma Power Source
ESP-400CPlasma Power Source
1-7
WARNING
!
Explosion hazard.
Certain molten aluminum-lithium (Al-
Certain molten aluminum-lithium (Al-Certain molten aluminum-lithium (Al-
Certain molten aluminum-lithium (Al-Li) alloys can
Li) alloys canLi) alloys can
Li) alloys can
cause explosions when plasma cut OVER water.
cause explosions when plasma cut OVER water.cause explosions when plasma cut OVER water.
cause explosions when plasma cut OVER water.
§ These alloys should only be dry cut on a dry
These alloys should only be dry cut on a dryThese alloys should only be dry cut on a dry
These alloys should only be dry cut on a dry
table.
table.table.
table.
§ DO NOT dry cut over water.
DO NOT dry cut over water.DO NOT dry cut over water.
DO NOT dry cut over water.
§ Contact your aluminum supplier for
Contact your aluminum supplier forContact your aluminum supplier for
Contact your aluminum supplier for
additional safety information regarding
additional safety information regardingadditional safety information regarding
additional safety information regarding
hazards associated with these alloys
hazards associated with these alloyshazards associated with these alloys
hazards associated with these alloys
.
Do not cut in atmospheres containing explosive
Do not cut in atmospheres containing explosiveDo not cut in atmospheres containing explosive
Do not cut in atmospheres containing explosive
dust or vapors.
dust or vapors.dust or vapors.
dust or vapors.
Do not carry any combustibles on your person
Do not carry any combustibles on your personDo not carry any combustibles on your person
Do not carry any combustibles on your person
(e.g. butane lighter)
(e.g. butane lighter)(e.g. butane lighter)
(e.g. butane lighter)
Do not cut containers that have held combustibles.
Do not cut containers that have held combustibles.Do not cut containers that have held combustibles.
Do not cut containers that have held combustibles.

Table of Contents

Related product manuals