ESAB Multimaster-260 User Manual

57
SECTION 6 REPLACEMENT PARTS
21155
21155
21156
21156
21160
21160
21161
21161
21161
21161
21162
Drive Roll and Guide Tube Selection
Guide Tube
NAS
* Two drive rolls are required for four roll drive systems.
Wire Type
& Diameter
Roll Drive*
.023 in. (0.6 mm)
.030 in. (0.8 mm)
.035 in. (0.9 mm)
.045 in. (1.2 mm)
.030 in. (0.8 mm)
.035 in. (0.9 mm)
.040 in. (1.0 mm)
.045 in. (1.2 mm)
.052 in. (1.4 mm)
1/16 in. (1.6 mm)
5/64 in. (2.0 mm)
0558001077
0558001077
0558001078
0558001078
.030 in. (0.8 mm)
.035 in. (0.9 mm)
3/64 in. (1.2 mm)
1/16 in. (1.6 mm)
0558001077
0558001078
0558001078
0558001078
0558001078
0558001079
0558001079
21158
21158
21159
21159
Hard Wires (“V” groove)
Soft (aluminum) Wire (“U” groove)
Cored Wires (Knurled “V” groove)
0558001896
0558001896
0558001897
0558001898

ESAB Multimaster-260 Specifications

General

Brand	ESAB
Model	Multimaster-260
Category	Welding System
Language	English