To Next PageTo Next Page
Need help?Do you have a question about the ESAB Powercut 875 and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Input Current | 16 A |
| Output Current Range | 20 - 80 A |
| Output Current | 80 A |
| Cutting Capacity (Severance) | 30 mm |
| Max Cutting Thickness | 30 mm |
| Protection Class | IP23 |
| Cutting Capacity (Recommended) | 25 mm |
| Open Circuit Voltage | 300 V |
Covers operator familiarity, workplace suitability, and personal safety equipment.
Details risks like electric shock, fumes, arc rays, fire, noise, and malfunctions.
Introduces the Powercut 875 and the manual's purpose.
Lists different cutting package configurations offered.
Lists detailed technical specifications of the Powercut 875.
Lists available add-ons and spare parts kits for the equipment.
Covers general installation, equipment needed, and location guidelines.
Details inspection steps and primary electrical input connections.
Explains secondary (output) connections and associated electrical safety warnings.
Explains the Powercut 875 controls and initial operation steps.
Details how to perform cutting, including torch angle and basic cuts.
Covers drag cutting, electrode wear limits, and specific techniques.
Lists common cutting issues and their probable causes for diagnosis.
