8 ORDERING SPARE PARTS
8 ORDERING SPARE PARTS
The PSF 260C, PSF 415C and PSF 420Cw are designed and tested in accordance with
international and European standards IEC/EN 60974-7. On completion of service or repair
work, it is the responsibility of the person(s) performing the work to ensure that the product
still complies with the requirements of the above standard.
Spare parts and wear parts can be ordered through your nearest ESAB dealer, see
esab.com. When ordering, please state product type, serial number, designation and spare
part number in accordance with the spare parts list. This facilitates dispatch and ensures
correct delivery.
CAUTION!
Repair and electrical work should be performed by an authorized ESAB service
technician. Use only ESAB original spare and wear parts.
To Next Page
Loading...
