1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons
before assembling or ordering parts.
3. To make assembly of your basketball system easier, use the Hardware Identifier on page 4
to identify and sort all fasteners. Check all cartons for kits. All hardware may not be
located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes
may not align and parts may not easily fit together. Leave locknuts slightly loose until you are instructed to
tighten them.
O W N E R ' S M A N U A L
MODEL NO.
B5409W
SB60 - GHOST
BASKETBALL SYSTEM
Please visit our Website at:
www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE
®
SPORTS PRODUCT INFORMATION
2L-7968-00
Escalade
®
Sports products may be manufactured and/or licensed under the following patents:
6419596, 6179733, 5919102, 5071120, 4798381, 4424968, D326128, 7244046
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
2021 Escalade Sports
©
®
5.
An electric screwdriver is helpful in assembly. However, please set at low torque and use caution
because you could overtighten the hardware and strip the screws.
6.
Save these instructions and your proof of purchase (receipt) in the event that the manufacturer
has to be contacted for replacement parts.
Contact Escalade Sports customer service department at:
Phone: Toll – Free !
Fax: 1-866-873-3536 Toll – Free !
E-mail: basketball@escaladesports.com
Escalade Sports
817 Maxwell Ave.
Evansville, 47711IN
Please Do Not Return This Product To The Store!
Physical Location:
PO Box 889
Evansville, 47706 IN
Mailing Address: (Correspondence Only)
®
1-800-USA-GOAL
To Next Page
Need help?
General
