1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. Tools required for assembly: Allen Wrench T1 & Wrench T2(included) , 10mm Wrench is helpful and
5. An electric screwdriver is recommended in assembly. However, please set at low torgue and use
extreme caution with an electric screwdriver because you could overtighten the hardware and strip
the screws.
6. To make assembly as easy as possible, place all parts of the table tennis table in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual.
Do not dispose of the packing material until assembly is completed.
7. Avoid scratching table tennis to
p and metal tube parts during the assembly process.
8. Assemble product on a clean, level and flat surface.
9. Take time to correctly orientate parts exactly as per each assembly diagram.
10. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
O W N E R ’ S M A N U A L
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE SPORTS PRODUCT INFOR
MANTION
R
Escalade Sport products may be manufactured and/or licensed under the following patents.
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
2023 Escalade Sports
R
C
R
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
Phone: 1-800-467-1421 Toll-Free!
Fax: 1-866-873-3533 Toll-Free!
E-mail: tabletennis@escaladesports.com
R
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS
CAREFULLY! AT LEAST TWO ADULTS ARE NEEDED TO PUT
THIS TABLE TOGETHER!
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as
Manufacturing defects or missing parts. However, if you have any problems with your new product, please DO NOT RETURN IT
TO THE STORE!
Mailing Address
(correspondence only):
Escalade Sports
PO Box 889, Evansville, IN 47706
Be sure to write your model number and serial number
here for future reference. You can find these numbers
printed on the bottom of the table.
MODEL NO.: T8631F
DATE CODE : CPSIA#2-T8631F-____-SY
PURCHASE DATE : _____________________
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner’s Manual.
Phillips Screwdriver.
Physical Location:
Escalade Sports
817 Maxwell Ave.
Evansville, IN 47711
CAUTION:
To Next Page
Need help?
General
