To Next PageTo Next Page
Need help?Do you have a question about the ESCALADE SILVERBACK SBX50 and is the answer not in the manual?
General| Brand | ESCALADE |
|---|---|
| Model | SILVERBACK SBX50 |
| Category | Sports & Outdoors |
| Language | English |
Assemble parts 2 and 3 of the base frame using provided hardware.
Insert axle bushings into steel tubes, ensuring proper alignment with the groove.
Carefully slide the ballast assembly onto the lower pole.
Position and connect the middle pole into the lower pole, aligning all holes.
Insert the top pole into the middle pole, aligning spring and actuator brackets.
Attach the arms to the upper pole using hardware, finger tightening nuts initially.
Attach the backboard box to the lower and upper arms with specified hardware.
Insert the spring into the bracket and connect it to the upper board arms.
Attach the backboard to the supports using hitch pins for initial securing.
Mount the rim to the backboard and attach the net by looping over the horn.
Slide the actuator bar into the bracket and engage the lock mechanism.
Insert and secure the actuator grip onto the actuator bar using screws.
Adjust the system's height to the specified 8 feet using the actuator pin.
Fill the ballast with water and carefully move the system to its desired location.
Critical safety warnings and precautions for system operation and use.
Details of the product's limited 5-year warranty coverage and terms.
Procedures and requirements for submitting warranty claims and support.
