Description & Passwords
The ‘Details’ window allows for the assignment of a unique logger description for easy logger
identification and the ability to assign a password to your iLog logger (see figure 1.6 below).
To assign a password click the ‘Change Password’ button located at the bottom right of the
‘Program and Configure Details’ window (see figure 1.6 below). The ‘Password Settings’ window
will appear (see figure 1.7). Here you are given two options, the ‘Protect program settings’ option,
which provides for the protection of the programming settings you have issued for you logger.
The second option is the ‘Protect retrieval of readings’ option, which disallows individuals from
viewing information downloaded from your logger without a password.
Once you have selected the password protect options you require and have entered and
confirmed your password select the ‘OK’ button. Once you have entered a description and
password (if required) select the ‘Next’ button.
Figure 1.6 – Program and Configure Details Window
To Next Page
Loading...
