Cleaning an iLog’s humidity sensor
The iLog humidity sensor needs to be clean in order to operate at an optimum level. If your iLog’s
humidity sensor comes into contact with a foreign object (e.g. fingers), it is vital that the sensor is
cleaned with a cleaning solution. We recommend that a cleaning solution which is 50% isopropyl
alcohol (IPA) and 50% water is used to clean the sensor. We also advise that you use a cotton
bud or clean cloth to clear the sensor of foreign materials.
iLog humidity internal view iLog humidity sensor iLog humidity and
temperature sensor
To Next Page
Loading...
Need help?
General
