Escort Passport Max2 User Manual

Getting Started – Installation
What’s Included
• Radar/laser detector unit
• StickyCup windshield mount
• SmartCord power adapter
• Quick Reference Guide
• Soft-shell case
Mounting Tips
• Center on windshield between driver and
passenger.
• Ensure clear view of road ahead and sky above.
• Avoid windshield wipers and heavily tinted areas.
To mount in your vehicle:
1 Remove backing from StickyCup mount.
2 Firmly press StickyCup onto windshield and flip
locking clamp to secure.
3 Slide PASSPORT Max2 mounting slot onto
mounting bracket and push back gently to lock into
place.
4 To adjust view, loosen thumb wheel and adjust
angle of mounting bracket. Tighten thumb wheel
to secure.
5 To remove detector, press mount release button on
top of PASSPORT Max and slide device off
mounting bracket.
6 To remove mount from windshield, release locking
clamp and pull tab on top of StickyCup.
StickyCup Care Instructions
To clean StickyCup, simply rinse under warm water,
gently wipe off any debris and allow to air dry.
To begin using PASSPORT Max2:
1 Plug small end of SmartCord into modular jack on
PASSPORT Max2 and large end of SmartCord into
your car’s lighter/accessory socket.
2 PASSPORT Max2 should power on automatically. If
not, press the device’s power button.
3 Upon initial power-up, PASSPORT Max2 will ask you
to confirm some basic settings and preferences.
Press MRK button to scroll through and OK these
settings (or press VOLUME + or – to edit).
NOTE: You can easily access and customize all of your
settings and preferences by pressing and holding the
MRK and SEN buttons. See the Settings & Preferences
section for details.
76
StickyCup
Locking Clamp
Thumb Wheel For
Angle Adjustment
Mounting Bracket
Controls & Features
Mini USB Jack
Connects to your computer via USB A/mini B
cable for downloading software updates
Modular Jack
Connects to SmartCord for powering
your device
Earphone Jack
Connects to optional 3.5 mm
stereo earphone.
Using SmartCord
• Mute Button: Press to mute an alert; press
three times to lock out a false alert; press
twice while receiving a locked-out alert to
unlock. (When connected to ESCORT Live!)
Press and hold mute button on unit or cord
to manually report to other users a verified
X or K-band alert, or a police officer
observing traffic.
• Alert Light: Blinks orange when receiving an
alert.
• Power Light: Lights blue when receiving
power.
Modular Connector
Plugs into detector jack
Lighter Adapter
Connects to lighter/accessory socket
Display (OSP)
OverSpeed alert setting that can be
adjusted in Preferences. Bluetooth
icon will appear on display screen
blue when paired to phone and
Speed limit data will show here
when ESCORT Live App is open.
Mark Location (MRK)
To mark a location for
future alerts, press MRK
twice, then VOL + or –
to select the type of
marker, then MRK
again to confirm. Press
twice while receiving
marker alert to unmark
Display
Current speed
Power
Press to turn Max2
on or off
Mute
Press to mute an alert;
press three times to
lock out a false alert;
press twice while
receiving a locked-out
alert to unlock
Brightness (BRT)
Press to adjust display
brightness (Min, Med,
Max, Auto, Dark)
Sensitivity (SEN)
Press to adjust detector
sensitivity (Highway,
Auto, Auto NoX)
Volume
Press and hold + or −
to adjust volume
Mount Release
Press to remove device
from mounting
bracket
Display
Alert area
OverSpeed Alert
Speed Limit Sign
Bluetooth

Escort Passport Max2 Specifications

General

Brand	Escort
Model	Passport Max2
Category	Radar Detector
Language	English