EasyManua.ls Logo

ESI ES3247 - +HR Boost Function Guide

ESI ES3247
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press +HR on the Central Heang Zone 1 or Zone 2 channel buon
(1 or 2 on fig.3). One press of the buon will give one extra hour of
Central Heang; two presses of the buon will give two extra hours;
three presses of the buon will give the maximum three extra
hours. Pressing it again will switch off the +HR funcon. The + 1HR ,
+2HR or +3HR status of each zone will appear on the right of the
display.
Fig. 3
7
(1) (2) (3)
Using the +HR Boost Funcon
The +HR funcon allows the user to have up to 3 hours of extra
Central Heang or Hot Water, without having to change the
programme or use the ON or OFF buons.
NB: The +HR funcon is only available when the programme is in
AUTO, ALL DAY or OFF operang modes. If the programmer is in
AUTO or ALL DAY mode when the +HR buon is pressed and the
resulng me of the boost overlaps a START/ON me, the boost will
disengage.
To +HR Boost Central Heang
To +HR Boost Hot Water
Press +HR on the Hot Water channel buon (3 on fig.3). One press
of the buon will give one extra hour of Hot Water; two presses of
the buon will give two extra hours; three presses of the buon will
give the maximum three extra hours. Pressing it again will switch off
the +HR funcon. The + 1HR , +2HR or +3HR status of each zone will
appear on the right of the display.