3. Once the desired temperature is reached (and after
approx. 6 seconds) the time display will be replaced by a
display indicating the time left to the next programme
(the length of time the temporary override will run, if left
unhindered) and the display then alternates between
the time left and the current time. When the next ON/
comfort programme is arrived at, the temporary override
will end and Auto mode is reactivated.
4. Press the
Home button to cancel this function and
reactivate Run mode.
3.7 Holiday Mode
Holiday Mode saves energy by letting you reduce the
temperature for 1 to 99 days while you are away from home,
resuming normal operation on your return.
To set the Holiday Mode:
1. Make sure the Programmable Room Thermostat is in
Auto mode. Press the H button, underneath the fascia
and the suitcase symbol will appear on the display and
the number of days will flash.
2. Press +/– to set the number of days you will be away.
3. Press the Next
button and the temperature will flash.
Press +/– to set the desired temperature.
4. Press the Next
or Home button, or wait 15
seconds to automatically confirm.
5. The number of days chosen will alternate with time symbol
on display and the number of days will count down.
6. Once the countdown has finished the thermostat will
return to normal operation. It may be advisable to set
the Holiday Mode 1 day less so the house is back up to
temperature for your return.
15
To Next Page
Loading...
