4.1 Setting the Time and Date
The time and date are factory set so it will not normally be
necessary to do this on site. Changes between summer and
winter time are handled automatically by the unit.
1. Switch the slider to Time/Date. The hour symbols will
flash, use + or – to adjust.
2. Press the Next
button and the minute symbols will
flash, use + or – to adjust.
3. Press the Next
button and the day date will flash,
use + or – to adjust the day.
4. Press the Next
button and the month date will flash,
use + or – to adjust the month.
5. Press the Next
button and the year date will flash,
use + or – to adjust the year.
6. Press the Next
button and choose between 12hour
or 24hour clock by using the + or – buttons.
7. Press the Next
or Home button, or wait for 15
seconds to automatically confirm and return to Run
mode.
4.2 Using the Copy Function
The unit is provided with a copy function which allows an
adjusted programme to be copied to another day or set
of days. This avoids the necessity of re-entering a desired
programme for another day or sets of days.
N.B. This function only works in 7 Day setting.
4. Program settings
17
To Next Page
Loading...
