ESI MAYA44 - 9 Specifications

MAYA44 ESI
34
9. Specifications
<Analog Audio>
1. Sample rate supports : 32, 44.1, 48, 88.2, 96, (176.4, 192)* kHz *Playback
only
2. Analog Input :
1) Connector Type : 4 Channel analog inputs
* 1/4" TRS(stereo) jack(line in 1 and 2) common with 'Mic. in'
* 1/4" TRS(stereo) jack(line in 3 and 4)
2) Peak level : 0dBFS @ +6dBV
3) Programmable gain : -48dB ~ +24dB(1dB step size)
4) Impedance : 10K Ohm
3. Analog Output :
1) Connector Type : 4 Channel analog line outputs
* 1/4" TRS(stereo) jack
2) Peak level : +6dBV @ 0dBFS
3) Attenuation : -48dB ~ +0dB(1dB step size)
4) Impedance : 33 Ohm(line out 1 and 2), 0 Ohm(line out 3 and 4,
H.P. out)
4. MIC Preamp
1) Mic Preamp Gain : +21dB
2) Peak level : 0dBFS @ 246mV
3) +48V phantom power supply
4) Impedance : 3K ohm
5. Headphone Amplifier
1) Load Impedance Range : 32-300 ohm (for the best performance)
2) Output Power : 125mW @ 32ohm per channel
<Digital Audio>
1. Sample rate supports : 32, 44.1, 48, 88.2, 96, (192)kHz *Coaxial Output only
2. A/D Converter
1) SNR : 102dBA(0dB @ fs=48kHz)
2) DR : 102dBA
3) THD : - 95dB(1kHz, -1dBFS)
4) Interchannel Isolation : 90dB
3. D/A Converter
1) SNR : 108dBA(0dB @ fs=48kHz)
2) DR : 108dBA
3) THD: -97dB(1kHz, 0dBFS)
4) Interchannel Isolation : 100dB
4. Digital Output
1) Connector Type : Coaxial, Optical
2) Format : IEC-60958 Consumer(S/PDIF)
3) Resolution : 24-Bit
4) Digital Pass Thru