Esko Kongsberg XP - Page 3

3
EC DECLARATION OF CONFORMITY
FOR MACHINERY
Manufacturer: Esko-Graphics Kongsberg AS
Address: Kirkegårdsveien 45, NO-3616 Kongsberg, NORWAY
The manufacturer declares that
Product: KONGSBERG Cutting Table
Type: XP
Serial number: __________
- are in conformity with the provisions of the Machinery Directive (98/37/EC), as amended,
and with national implementing legislation;
- are in conformity with the provisions of the following other EEC directives:
- 2006/95/EC (LVD)
- 2004/108/EC /EMC)
- has completed EMC test according to
- EN 55022:2006 + A1:2007, EN 61000-6-2:2005, EN 61000-6-3:2007, FCC Part15:2007
and furthermore declares that:
- the following harmonized standards have been applied:
- EN ISO 12100-1:2003, EN ISO 12100-2:2003, EN ISO 13857:2008, EN 954-1:1996,
EN 61496-1:2004, EN 60204-1:2006, EN61000-6-2:2005, EN61000-6-3:2007
Attestation of Conformity certificate no: CE-0811-116562-10
Conformity evaluation body:
Nemko AS
Gaustadalléen 30, P.O.Box 73 Blindern
NO-0314 Oslo, NORWAY
The above-mentioned product corresponds to the prototype for which the Statement of
Conformity certificate was issued.
Kongsberg, March 20, 2009
______________________
Emil Skarra
Managing Director