Need help?Do you have a question about the Esoteric G-03X and is the answer not in the manual?
Turns the unit on. The indicator lights up, starting oscillator pre-heating, indicated by blinking frequency indicators.
Use the FREQUENCY MODE button to select the fundamental word clock frequency (e.g., 44.1kHz, 48kHz, 100kHz).
Press buttons A, B, or C to select the word clock frequency for each line based on connected device compatibility.
Configure connected devices to receive word synchronization input, referring to their respective manuals.
Check AC power supply, outlet, and ensure the unit's power switch is on.
Verify word clock output compatibility with players and select appropriate frequencies.
Turns the unit on. The indicator lights up, starting oscillator pre-heating, indicated by blinking frequency indicators.
Use the FREQUENCY MODE button to select the fundamental word clock frequency (e.g., 44.1kHz, 48kHz, 100kHz).
Press buttons A, B, or C to select the word clock frequency for each line based on connected device compatibility.
Configure connected devices to receive word synchronization input, referring to their respective manuals.
Check AC power supply, outlet, and ensure the unit's power switch is on.
Verify word clock output compatibility with players and select appropriate frequencies.
General| Category | Inverter |
|---|---|
| Output Frequency Range | 10 MHz |
| Frequency Stability | ±0.1 ppm |
| Output Impedance | 50 Ω |
| Power Consumption | 15W |
| Power Supply | AC 100-240 V |
To Next Page
