9
Hold down the FREQUENCY MODE button for more than 2
seconds to dim the display on the front panel to suit the
environment in which you listen to music.
Full brightness (normal mode)
z
Medium brightness
z
Minimum brightness
z
All the illuminations are turned off except the power
indicator.
< This setting is stored even when power is turned off and the
unit is unplugged.
< When you turn on the power or you operate other buttons,
the display temporarily lights at full brightness. It is dimmed
after the clock signal is stabilized (after “44.1 kHz” or “48
kHz” indicator stops blinking and lights steadily).
NOTE:
If you connect this unit to other manufacturers units, be sure
to read the manuals of those devices to confirm the frequency
range of synchronization.
Dual AES connection will require you to set the clock
frequency at one half of the audio signal frequency.
< Settings are stored even when power is turned off and the
unit is unplugged.
< When not in use, turn the G-03X off.
< Once settings have been made, those settings can be used
simply by turning on the power the next time the unit is used.
Switch the frequency mode using the FREQUENCY MODE
button depending on the disc to be played or device.
< Although the CD and Super Audio CD frequencies are
multiples of 44.1 kHz while the DVD frequency is a multiple
of 48 kHz, the universal clock enables compatibility with any
disc. The lack of the need to switch the frequency mode for
each disc results in considerable convenience.
Dimmer
To Next Page
Loading...
Need help?
General
