Identifying the Parts
POWER switch
Use this switch to turn the unit on and off.
< When the G-03X is turned on, the process of pre-heating
the oscillator to its operating temperature gets started. It
takes a few minutes before the oscillator is ready for
operation.
FREQUENCY MODE button
Use this to select the fundamental frequency of the word
clock.
44.1 kHz:
Select this for playback of CD, Super Audio CD, etc.
48 kHz:
Select this for playback of DVD, DAT, etc.
< Hold down this button for more than 2 seconds to dim the
display on the front panel (see page 9).
B
A
Frequency change buttons [A/B/C]
The frequency of the each line (A/B/C) is changeable.
Following frequency can be selected for each FREQUENCY
MODE.
When OFF is selected, the indicator turns off.
When the FREQUENCY MODE is set to 44.1 kHz:
44.1 kHz, 88.2 kHz, 176.4 kHz, 100 kHz, OFF
When the FREQUENCY MODE is set to 48 kHz:
48 kHz, 96 kHz, 192 kHz, 100 kHz, OFF
C
To Next Page
Loading...
Need help?
General
