Need help?Do you have a question about the Esoteric G-02 and is the answer not in the manual?
Owner's manual for the Master Clock Generator.
Instructions for use in French for the Master Clock Generator.
User manual in Spanish for the Master Clock Generator.
General safety warnings regarding electric shock, fire hazard, and proper usage.
Statements of compliance with FCC, IC, and China RoHS regulations.
Instructions for safe operation, placement, ventilation, and environmental concerns.
Guidance on electrical safety, power cords, and specific product warnings.
Guidelines for proper disposal of electrical equipment and batteries in Europe.
Verify accessories and review initial operational cautions for setup.
Explanation of front panel buttons, indicators, and display screen.
Technical explanation of the Oven Controlled Crystal Oscillator (OCXO).
Precautions to take before making any connections to the unit.
Diagram illustrating external reference signal generator and clock sync connections.
Details on EXT IN, CLOCK OUT, and SIGNAL GND connectors.
Details regarding the AC power inlet and supplied power cord.
Steps for powering on the unit and selecting the clock source.
How to set reference frequencies and sync connected devices.
How to set clock frequencies for A, B, and C output pairs.
How to set clock frequencies for individual outputs (A1, A2, etc.).
Available clock output frequencies for 44 and 48 kHz modes.
Expanded clock output frequencies for 44EXP and 48EXP modes.
How to set the reference frequency mode (44.1/48 kHz, EXP options).
How to adjust display illumination time and brightness.
Explanation of DISP and DIMMER settings for display illumination and brightness.
Meaning of PLL LOCKING and NO 10M-IN! messages.
Solutions for power, synchronization, and frequency selection problems.
Steps to restore the unit to its original factory default settings.
Guidelines for cleaning the unit's surface safely.
Technical specs for clock outputs, input, power, dimensions, and accessories.
Diagram showing the layout of connectors on the rear panel.
Contact information and instructions for recording model and serial numbers.
To Next Page
General