ESPEC SU 242 - Checking Accessories and Spare Parts

Bench-top type temperature(humidity) chamber Installation guide
10 ESPEC CORP.
5. Checking accessories and spare parts
①
Shelf
②Cable port rubber plug ③ Humidifying tray
drain hose
(SH/SU-222, 242,
262,242-5)
(SH/SU-642, 662)
④ Water tank level sensor
tank drain hose
⑤
Connector
⑥
Terminal plug
(For external interface)
⑦
Power plug
⑧
Wet-bulb wick
⑨
Cartridge fuse
⑩
Class CC fuse
⑪
Breaker handle
cover
⑫
Stylus pen
⑬
Operation manual
⑭
Warranty card
No.
Accessory/Part Use Q’ty.
Check if
included
①
Shelf Holds specimens inside the chamber. 1
②
Cable port rubber plug Use to seal the cable port. I.D. 50mm 1
③
Humidifying tray drain
hose
I.D. 8 mm hose with quick detachment plug. Use
to drain the humidifying tray and wick pan. (SH
only)
1
④
Water tank level
sensor tank drain hose
I.D. 5 mm hose with quick detachment plug. Use
to drain the water tank level sensor tank. (SH
chambers only)
1