Esse Bakeheart - Page 21

21
2. OPERATING INSTRUCTIONS
1. Remove the two screws holding the
steel baffle in place.
2. Remove the steel airwash by
unscrewing the two screws holding it in
place, and pulling clear through the front
of the cook stove.
3. Remove the steel baffle and baffle
insulation, through the front of the cook
stove.
4. Remove the side panel, by unscrewing
the three screws at the rear of the cook
stove, and the screw at the bottom of the
panel.
5. Remove the top two disks holding the
insulation in pace, (do not remove the
bottom two disks).
6. Peel down the two layers of insulation,
to reveal the air pipes.