- 21 -
2.Enroll fingerprint into card (Enroll FP card): directly store the
fingerprint that has been register into card, at this time there is a
fingerprint in the card, and that does not exist in the machine, user
may user “Card + Fingerprint” to identify himself, must punch
the Fingerprint card firstly, than place finger.
3. Create Fingerprint Card (Create FP Card): copy fingerprint
from the fingerprint machine in which exist to a Card, user can use
the fingerprint to verify, also can utilize a fingerprint and a
Fingerprint Card to verify.
4. Register Fingerprint Card (Reg FP Card): there is more than
two attendances machines, A enroll PIN. Card has been registered
in one fingerprint machine, which want to be use to anther
fingerprint machine, the Fingerprint Card must be registered firstly.
5. Clean Fingerprint Card (Unreg FP Card): this operation is a
reverse process to above operation
6. Erase fingerprint from Fingerprint (Empty FP Card): clear all
data (fingerprint, PIN) on the fingerprint card.
7. Copy Fingerprint from card. (Dump FP Card): Copy a
fingerprint from a card to Fingerprint machine, it is able to directly
track attendance by fingerprint after finish this operation process.
8. Transfer fingerprint into card (Move to FP Card): the fingerprint
in fingerprint machine is transferred to a Fingerprint Card. there is
not fingerprint in the fingerprint machine after transferred.
To Next Page
Loading...
