eSSL K21 - How to Set the Number of Failure to Verify; Group Verification

- 81 -
5.5.5 How to set the number of failure to verify
This option is a optional item, it only exist access control machine,
if times of user failure to verify equal to the value , the fingerprint
machine will send alarm signal, the set step is follow.
n Press (MENU) to enter main interface.
n Select “option” then press “OK”, Press “▲” and “▼”to scroll
up or down the screen to select Alarm Cnt.
n Press OK and Input the value you want, the system provides
with 0-9 digit to select, 0 means this function is invalid.
n Press OK key. And exit
5.5.6 Group Verification★
This option also is an optional item. It only is owned by some
fingerprint access control machine, if this option is set as Y(yes),
the fingerprint machine will able to perform Multi-combination
verification, its set step is follow.
Access Option ▼
Duress Option
►Alarm Cnt
GroupVerType