Getting Start
4.4.3 RF/ MIFARE card authentication ★
The RF card of a user is used to identify the user. You can register
the RF card number to the system in advance to provide against
loss or theft of the RF card.
4.4.4 MIFARE card authentication ★
The MIFARE card is a contact -less IC card, 1K card has its 1 K
byte memory assignment as 16 sectors, each with 4 blocks of 16
bytes. The MIFARE card interacts with the reader, which is able to
store fingerprint template inside, the fingerprint template is
transferred to reader, then the template against placed finger while
use performance verification.
The MIFARE card also own unique serial No. you can use it
instead of ID card. (For more detail see appendix.)
If the Mifare card has been used as created PIN card, need to enter
Pwd Affirm
Enroll No 00008
Error Pwd！
To Next Page
Loading...
