Option
his verification is positive, if this value is set as 3, that means the
fingerprint machine send a unlocking signal till only all three user
verify successfully, the interval of each personal is on more than 30
seconds. The max value set as 5 is available.
5.1.6 About daylight save time
Summer time, also called the "daylight saving time" (Daylight Saving
Time), is designted for energy conservation and a local time system, the
system is used during the implementation unified time known as
"daylight saving time." Usually in the early dawn of the summer day
people will be ahead one hour of time, people can get up early , reducing
lighting in order to make full use of resources illumination, save
electricity lighting power. To back again one hour in autumn. The
daylight saving time has the specific requirements in the different
countries. At present there are nearly 110 world countries each year to
use the daylight saving time.
In order to meet the needs of daylight saving time , we can open a
specialized custom settings in the fingerprint machine, in the XX,
XX-XX, XX-time hours, one hour faster, and by XX, XX-XX-XX, then
slow down a time hours.
[Instructions]
machines that support this functions, enter the menu -> Option ->
System Option -> the "daylight saving time" setting.
1) Perform the options the daylight saving time can be set. shown
asthe following:
To Next Page
Loading...
