- 41 -
Choose the daylight saving time to"Yes", after setting
completed ,press OK to save, this setting will take effect. If choice
is "No", then daylight saving time function will be ineffective.
2) after the daylight saving time function is actived, it is need to
configure starting and end events of daylight saving time. Set the
time format conversion, There are two modes of Mode 1 and Mode
2.
If you choose a mode l that is defaulted by system: its time format
shown as " the month, day hours: minutes"
If you choose the mode 2 of the daylight saving time "Month -
Weeks- week hours: minutes" mode.
Be allowed to input range is 1-to-6 for the number of weeks (WS),
if 1 you input means the first week, said that the second week if
input with 2, and so on. Allow to input range is 0 - 6 for each Week
(WK), if you input 0, 1 these 0,1 respectively represent the Sunday
Monday, and so on.
We take at 4:00 on September 1, 2008 (ie, in September 2008 the
first week of the week 6) as an example, these two models of Mode
1 and Mode 2
DLST ▼
►DLST Y
Date Fmt Mode1
Enter DLST
Standard
To Next Page
Loading...
