- 47 -
or view it via the super terminal.
Note: This function only support serial port (RS232)
printer, the parallel interface is not to be support, the
Baud rate of fingerprint machine and printer must be
same with. More detail see appendix
Note：
1) Additional fingerprint sensor and up grade firmware are
valid for these fingerprint machine that is provided with USB
port.
2) No. Card is valid for the fingerprint machine that is provided
with Mifare or ID Card.
3) R.Card Only. FPCard key only are used in fingerprint
machine with Mifare function.
4) Remote. AuthServer only are used in RIS function of
fingerprint machine.
5) Button Beep, Adjust Voice, only applies to these fingerprint
machine which use U.are.U Fingerprint sensor.
To Next Page
Loading...
