- 51 -
the different time period need to correspond checking state, the six
state key allows the User to choose the desired state prior to
clocking in/out.
These state key are set by manual, may press the corresponding key
to select state you want, for convenience operation, There is
another setting provided that allows state shift to be set either at IN
or OUT in an state schedule table. The state schedule table features
up to 4 entries.
Time State Selection: There are two fields of each state schedule
table entry: time field and corresponding state mode (IN/OUT)
field. When time up to the scheduled time, the fingerprint machine
will automatically switch selected state at IN or OUT by your
setting in state schedule table. Currently check condition will
appear on the initials interface of fingerprint machine.
How to set the time state selection
Setup time state selection
1．Enter menu->Option->Power Manage->Attstate Fun，such as
following picture：
2．Press “▲/▼”key to select check state you want set, there are
four state option that maybe set and four time period, that are clock
on, clock off, overtime check–in , overtime check-out, press ok key
Att state Fun
Check condition
On check-in
Exit (ESC) OK(OK)
To Next Page
Loading...
